75SDY electric motor to move the mobile screw 75SDY screw machine Main technical specifications: Product Features: 1, the full range of selection of imported compressor head. From Europe's cutting-edge technology, optimized line design, high accuracy, low internal leakage, with high efficiency, low energy consumption, low noise and high reliability. 2. Efficient fully enclosed air-cooled screw machine dedicated motor, protection class IP54, class F insulation. 3, using advanced "intake" "backstop" modular structure, without exhaust valve, effectively preventing the oil back down into the configuration regulator controller, which can be automatically 0-100% stepless supply. 4, imported valve, automatic control and regulation into the oil temperature within the host, thereby controlling the exhaust temperature was within a certain temperature range to prevent precipitation of moisture in the air compressor. 5, outdoors dedicated microcomputer controller, powerful, convenient and simple to operate, can achieve 24 hours unattended and computer multi-machine joint control. Complete automatic protection design, equipped with exhaust-temperature exhaust overpressure, phase, out of phase, under voltage leakage automatic protection. 6,75KW-250KW imported German designer (KTA) flexible coupling, transmission torque, life of 10,000 hours, greatly reducing the maintenance workload, reduce maintenance costs. Built-in stain vertical gas separator structure, the separator equipped with baffles, centrifugal, gravitational and mechanical collision efficient separation of three simultaneous, separate set of three, greater gas separation efficiency, lower pressure loss, longer life, to ensure that the oil content of the exhaust ≤3ppm. Technical parameters: Model volume flow m3 / min exhaust pressure (MPA) Motor Power (KW) Weight (kg) Dimensions (mm) oil content PPM 75SDY-8 12 0.8 75 1800 4150 × 1450 × 1950 ≤5 75SDY-14.5 9 1.45 75 1800 4150 × 1450 × 1950 ≤5